Heller Tools 927 Cutting Paste, Drilling Paste, Grease for Working with Metal, 50 g, Yellow

Product Information

Clay bar the paint to remove contaminants – this step will make sure there’s nothing bonded to the paint If nothing is in the clipboard nothing can be pasted, and the Paste option is grayed out. Something must be cut or copied before it can be pasted. Practice cutting and pasting text

Polycrystalline Diamond PasteThe particles in this paste has sharper angles and are more jagged in shape making polycrystalline diamond Paste suitable for polishing more challenging surfaces If you want to use a cutting compound to remove scratches and swirl marks in the paint, here’s what to do. Bear in mind that this works best on light, shallow scratches that are only in the top clearcoat. The instructions insist the H9.01 is only designed for use with a machine, but it was effective when applied by hand too. Yes, it’s expensive but a little goes a long way and it saves time and effort. It doesn’t have the all-round ability of the Koch-Chemie on new paint, but on dull and tired finishes it was unbeatable. Maybe put a bottle on your present list next birthday. Simoniz Scratch and Swirl Remover Using the two text fields below, try cutting ( Ctrl+ X) the text in the first box and pasting ( Ctrl+ V) into the second. After cutting and pasting the text, "Example cut text" should only be in the bottom box.You may need to wax the car regularly after cutting to protect the newly exposed paint and prevent it going dull. How to use it: Restoring the paint Rubbing compound can be applied by hand with a cloth or circular applicator pad, or with a polishing machine using a wool pad. If you want to apply the cutting compound to restore paint shine and remove oxidisation, the job is much bigger. It’s best to use a buffing machine rather than applying by hand for large areas. You should also work in sections from the top down, completing each section before moving on. Press and hold down on any text with your finger and then let go. Upon letting go, a menu should appear on top-right of the screen (shown to the right) that lets you cut. Highlight the text you want to cut and press your finger on Cut to cut. Pasting text Unlike the original T-Cut, the Colour Fast claims to have ‘3-in-1’ ability which takes away the surface layer of paint, fills scratches with a coloured compound and then applies a layer of protective wax.

Cutting compounds are abrasive paintwork products and may not be suitable to use on all cars. For minor paintwork issues like light swirl marks and dull colour, you may be better starting off with car polish. For best results, apply polish to restore shine and then apply a good quality wax to seal in the paintwork and maintain the shine. Diamond paste is a water-based polishing compound that is used for polishing the surfaces of many types of materials including stone, metal, ceramic, gemstones and glass. The paste consists of microscopic diamond particles (diamonds being the hardest natural material around) that act as an abrasive to scrub, smooth and polish surfaces. A diamond paste can also be used to clean surfaces, as, due to its consistency it can get into small grooves to remove dirt. Diamond paste is supplied in tubes or dispensing syringes for accurate dispensing. Benefits of Using Diamond Paste Cutting and polishing pastes are typically used to revive paint which has gone flat after being exposed to the sun or which has been aged with tiny scratches caused by washing, grit and general wear and tear. They can also be used to blend in new paint by matching the textures, or remove minor scrape damage from roadside thorns or careless parking.

Cutting fluid v Cutting paste

Both cutting fluids and pastes will have a lubricating effect. However their performance will depend on the quality of their ingredients. In particular the addition of superior extreme pressure or anti wear additives will greatly influence the effectiveness of either option. Press and hold down your finger on the screen where you want to paste and select Paste to paste the text. Practice cutting and pasting text A metal cutting paste or cutting fluid should be used when cutting or drilling metal. The primary reason is to offset or reduce the inevitable build up of heat. Heat is generateddue to both friction and energy lost whilst deforming the material. As air cooling alone is unlikely to be sufficient to prevent heat build up in both the tool and the work surface a drilling lubricant is required. Because excessive temperature can ruin the temper of the drill bit or the item being drilled it is important to prevent this happening. If you have had a bottle for years, the smell and colour of the liquid will be very familiar. What might be a surprise is how watery it seemed when you have a ‘fresh’ bottle. The scent, while familiar, is also a little overpowering at times.