The 7 Slot Mode has space for up to ATX motherboards. This mode will reduce radiator support – removing support for a top radiator when using any size motherboard. When using an ATX motherboard, the bottom radiator can only be 240mm, but with ITX and M-ATX you can install up to a 280mm radiator. Each PC also undergoes high level configuration and optimisation for high-end applications such as: Lian Li has also introduced the O11 Air Mini along with several other products at its DIGITAL EXPO 2.0. Thus, the popular O11 family gets a new offshoot, which advertises with extra airflow. Whether the attempt to build a case that advertises with „mini“ and an airy design, but not lose the high demands on … (Weiterlesen...)

I definitely like the look and size of this one. While I like my old (and still current) case, this one would allow me to move my newly built system from my existing floor standing ATX mid tower and place it into this one on top of my desk. No more dog hair getting into my filters. it also fits my DRP4 and a full sized ATX PSU, which is most excellent. The price is reasonable, too. The power supply is mounted in the Lian Li O11 Air Mini as usual with four screws. Well thought-out by Lian Li: The power supply is slightly elevated and does not rest on the floor. This gives you the opportunity to neatly run cables underneath and thus reach the lower slots on the motherboard. Similar openings are also found on the upper edge. In the HDD/SSD case, the disks can be stored in two holders with the included screws. Once screwed tight, they can be put into the case. Practical test The installation of the components went very well. All important places were easily accessible, which is also due to the easily removable side panels. As soon as the lid was loosened, the front and side could already be removed. The well-known from-above-insertion principle of Lian Li found its way here, too, of course.Dual Chamber Design for Cable Management The dual-chamber design behind the motherboard tray made cable management a simple job. Our team of specialists would be more than happy to assist in choosing the right system for you and to discuss upgrades or technical advice should an issue arise.

Constructed of steel instead of aluminium, the O11 Air Mini no longer retains the initial focus on ITX builds, evident in the case's larger footprint. The undesirable feature of the unattractive bottom air filter is unfortunately still here. Despite these changes, the case has kept its cost reasonable, while its size remains relatively compact for an ATX case. A sophisticated profile is crafted through the steel mesh panel at the front, a change from the lively look of the Lian Li O11D Dynamic Mini’s glass side and front panel. However, the see-through side panel and the aluminium trim accent at the front remain. Configuration Options The bottom of the case even has a removable dust filter for easy cleaning. There is plenty of room for enthusiast-grade hardware in both air and AIO cooling setups. There are even several different configurations depending on your preferences. This versatility allows for up to 280mm radiators, large GPUs, tall CPU coolers and ATX motherboards. Whether you’re a casual or a hard-core gamer, Norton 360 for Gamers provides multiple layers of protection for your devices, game accounts, and digital assets.Clearance for High-Performance CPU Cooler and ATX PSU Although O11 Air Mini is a compact case, it provides up to 167mm height CPU clearance, allowing users to mount their performance CPU cooler in the system.

Optimized Dust Management The mesh panels of O11 Air Mini are designed as dust filters and intake sufficient air into the chassis.In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible. The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case. Additionally, This is also where the PSU and storage are concealed. The main chamber will display your best components and this case makes cable management a breeze.

The case only has one filter, at the bottom, and it keeps the same, not-so-pretty plastic handle as the O11D Mini. This is visible on the side, and although practical, a little unsightly. Furthermore, you can install a standard ATX mainboard in the main chamber and place a tower cooler with a height of up to 170 mm on it. Furthermore, you can install graphics cards that have a maximum length of 362 millimeters. The numbers definitely impressed us.Fan mounts: 2x 120mm/140mm front, 3x 120/2x 140mm roof, 1x 120mm rear, 2x 120mm side, 2x 120mm/140mm floor.