Connectors: (2) XLR/TRS 1⁄4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch On the rear panel is the usual IEC power inlet and power switch, XLR audio input, and an XLR link output for feeding the input signal to another active speaker. There are no EQ settings or mixing facilities, but you can plug a dynamic microphone directly into the speaker’s input. The TS310 is equipped with a 10-inch woofer alongside a 1.4-inch tweeter that both work in perfect synch to deliver a smooth sound with a frequency response that ranges from 54 Hz all the way to 20 kHz and can reach a maximum sound pressure level of 129dB. This speaker is driven by a 2000w Class D amplifier while brand new transducers provide you with the cleanest possible sound. Thanks to the intelligent, super-robust design this speaker can be used as either a main front of house speaker or as an on-stage monitor.

The Alto TS310 is also intended for those who refuse to be weighed down by bulky and hefty audio equipment when going from one venue to the next. The powerful 10-inch driver of the speaker is housed inside a compact cabinet that can be transported trouble-free as it weighs just a little over 30 pounds. What Customers are Saying There are a couple of things about the Alto TS310 that a lot of customers love. First, it is capable of producing loud and clear sound, courtesy of its powerful amplifier. What’s more, many people agree that the bass is deep and punchy. Second, the TS310 carries a price tag that’s reasonable enough. However, some consumers note that the cabinet seems to be insubstantial as it tends to rattle especially when there’s a lot of bass. The Bottom Line

Alto TS310 2000 Watt Active Speaker Overview

Also, thanks to the Alto TS310’s cabinet design, you can use it as a fantastic wedge monitor. Explosive Power, Versatility and Portability Deliveries will be made subject to the terms and conditions of the courier company. djkit.com will not be held responsible for late deliveries. True to form, Alto Professional have added yet another fantastic loudspeaker to their Truesonic series. Power comes from Class‑D amplifiers rated at 350 Watts peak or 175 Watts continuous, and the overall system has a specified frequency response of 75Hz to 20kHz at the ‑3dB points. Protection is provided by a built‑in analogue limiter and additional thermal overload protection circuitry. Two LEDs indicate power and the presence of signal/clipping, while a rotary control adjusts the input gain, which offers enough range to cater to both line‑level and mic‑level sources. There’s also a power LED on the front panel. The maximum SPL for a single speaker is specified as 117dB at a distance of one metre, which although not massive, should be adequate for many types of small venue applications including solo artists, duos and bands without loud drum kits. The speakers are suitable for both vocals and instruments such as guitar, though you’d need the larger models and/or an additional subwoofer if planning to put bass or drums through the PA. With a little mixer EQ you can get a very workable vocal sound out of these speakers, and a pair will provide adequate volume for smaller venues... Tapping on the case reveals some panel resonances, which is not uncommon with moulded speaker enclosures, and this is most likely a contributing factor to the lower‑midrange sound coloration I heard when playing full‑range material through the TX310. I got the impression that the speaker had been voiced to give a good account of the low end and to deliver a crisp treble, but at the expense of some midrange clarity. Some low‑mid cut centred around 200Hz cleaned this up to a useful degree, especially in a vocal PA setting, as it helped tame some of that unwanted boxiness. There’s also a useful amount of mic gain if you plug a mic directly into the XLR input, which is always good to know for those ‘broken mixer’ emergencies or for basic announcement work, though there’s no opportunity to add EQ or effects if you work that way.

Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 54–20 kHz (+/- 3 dB) Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF) LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil

Rating

Thanks to the lightweight and rugged design, the Alto TS310 is easy to transport and set up. The high-efficiency class D amps with passive cooling design ensure the speaker runs cleaner, quieter and has better long-term reliability. The Alto TS310 offers flexible mounting/placement application allowing it to be attached to poles, walls and ceilings. The TS310 is the ideal loudspeaker for users looking for a powerful, reliable PA speaker without the big investment. Combining powerful, fantastic audio quality with an elegant and lightweight yet rugged and versatile cabinet along with a useful, intuitive user interface - designed and tuned in the USA; the Alto TS310 active speaker impresses on all fronts. Enclosure Construction: Trapezoidal, injection-moulded polypropylene enclosure, with perforated steel grille Crisp and clear high-end is taken care of by a 1.4” neodymium magnet HF driver that utilises a precision wave guide. Great Features Custom engineered high-efficiency class D amplifiers with passive cooling design (no fan means the speaker runs cleaner, quieter and has greater long-term reliability)