Virgin Media TiVo Remote Control

Product Information

Here’s a few of the most common issues faced by people with a Virgin box. They’ll be relevant whether you’re using a TiVo box or another type of set top box, and some of the suggestions will be specific to each design. My Tivo remote is unresponsive, or the volume buttons aren’t working Comes with almost 1000 codes for all major television and set-top box brands; usually set-up within seconds The Flipper instructions come with programming codes for the brands of set-top boxes that are shown in the table below.

If the previous step has not worked, try the factory reset on your remote. This is done by holding down the TV and the rewind buttons at the same time. The rewind button is the one with the double arrow facing left toward the bottom of the remote. This could be due to a number of reasons, including a defective remote control, incorrect settings, or a damaged cable.

It’s free and easy.

Automatic search allow you to perform a complete search of all the codes contained inside the remote. You should do this if you haven’t managed to get your volume control working using the codes listed for your TV model, or if your TV model isn’t listed. You can now enjoy controlling your TV with your Virgin remote. Why is Volume not working on Virgin Media? If you use an IR-based Virgin remote, ensure no smudge on the IR emitter. Suppose the IR emitter is damaged due to an accidental fall, buy a replacement remote instead of repairing it. Use the Remote in a Range First, point your remote at the box while holding the TV button and the zero button for ten seconds. The TV button is located towards the top on the right side of the remote. The zero button is at the bottom center of the remote.

The Dual-Function feature allows you to turn both your television and Freeview/Sky/Virgin boxes on/off using just the Flipper.Make sure your tv is on then press the home button on your remote. This button is located at the top of the remote and has a little house on it. it comes up with a screen asking me to choose my device, this screen correctly shows “Pair TV Sony” Profiles – families can now create their own profiles so that they can control their own pause points, select their favourite channels and receive personalised recommendations. If the remote has connected, you should see flushing on both the remote and on the box. Sometimes the remote still will not have connected. If this is the case, try the next step. If it has worked, skip the next step, and move on to the one after it. Over the air software update is only compatible with V6 boxes. Customers with a TiVo box will require a box swap for a Virgin TV 360 box.