Corsair Hydro H60 Liquid CPU Cooler - Black

Product Information

This means that unless you look at the part number or pictures, there is no way to tell the original version apart from the new one. The pump on the new revision is slightly louder than the original, but once the unit is installed into a chassis, the difference should not be detectable. The WS320 wireless wind sensor pack offers a high performance solution, with exceptional data accuracy and improved aerodynamics, which is easy to install and includes all the parts you need. Death666Angel - Monday, November 7, 2011 - link Unless your reservoir is in the region of several tens or hundreds of litres, the reservoir serves no cooling purpose. we were excited to see that the H60 has AM4 support, but then we were shocked to find that no AM4-specific brackets came in the box, as they do with every other cooler we’ve tested with built-in support for the AM4 socket.

One of these coolers, the Corsair H60, has served us very well in our Puget Hydro CL3 liquid cooling systems. Note that we’re going to skip idle metrics here, because no one overclocks a PC to watch it sit idle all day!Once a water cooling solution reaches a certain amount of water flow, increasing the amount will not help the cooling in any way, so the limited flow in these units does not negatively contribute to its lack of performance. The main thing to talk about is the LED illumination that is on the CPU block, like the other Corsair AIOs this is not RGB but white instead, we'd guess this is a further cost saving measure but definitely not a bad choice as it still should go with any colour scheme. And this shouldn’t be a surprise, given that Thermaltake markets more coolers than any other manufacturer in the world, including some very fancy custom loop solutions.

In the next section, we will be testing this fan to see if it is an improvement over the original fan. But if you have a small case that has little room above the mainboard, these little systems don't need to beat the silver arrow at all. Finding a home for the radiator was a challenge for us because our case was crowded, but once a home had been located on the side of the case by a fan we were good to go. However, others say that it arrived missing screws, bolts, visible marks on the item, and all the hardware for mounting the cpu block was missing.People who only cool their CPU might go with a 240 setup, but that doesn't really work more quietly, more efficient, cheaper or easier than simple air cooling, as you have shown.