WARNING: This product is a Hand Operated Compound Mitre Saw and must only be used as such. It must not be modified in any way, or used to power any other equipment or drive any other accessories other than those mentioned in this Instruction Manual. Workbench mountable and comes with rubber suction feet – When you buy a tool that has a workbench you can mount, you need to make sure that it stays in place while you work. The rubber feet at the bottom of the bench ensure stability on work surfaces which improves your safety as well. The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another. The Angle Plate can now be slid into the Rip Fence channel found at the front of the machine table. (Fig. 20) If you miss one of your scheduled instalments and Klarna are unable to automatically withdraw the money from your account 2 days later, you'll be issued with a statement for the full amount due.

Note: A workshop dust extraction device can be connected to the extraction port found at the rear of the machine if required.Multi-Material Cutting: No more need for multiple saws. With the FURY6’s multi-material cutting technology, one blade suffices for a range of materials. From wood to metal*, achieve clean, precise cuts with ease. Long work pieces should be supported on the work supports provided or on appropriate additional work supports. Evolution FURY6 210 mm TCT Multipurpose Table / Mitre Saw. Thanks to the patented Evolution technology, the blade will easily cut steel, aluminium, wood (even wood with nails) and plastic, using just one blade, resulting in fast, clean and accurate cuts. Features a powerful 1200 W hi-torque gearbox, which reduces motor stresses, improving performance and durability, out-performing regular saws. When cutting steel (only in mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks. Table saw mode – The FURY 6 has a sturdy rip fence allowing for fast, accurate straight cuts to be made on wood materials.

Overall the Evolution FURY 6 has a workbench that’s mountable with rubber suction feet to ensure you’re safe by keeping the tool firmly in place while you work. The other reason why customers like this saw are there’s no heat and no sparks. The way this saw performs is far more advanced compared to others on the market. When you are cutting steel using the only in mitre mode, you will see that you will have an instantly workable finish that doesn’t produce any heat, there’s no burr, and most importantly, no sparks. Keep hands in position until the ON/OFF trigger has been released and the blade has completely stopped. The Evolution FURY6 isn’t just a tool – it’s a revelation for both hobbyists and professionals. Its dual functionality eliminates the need for multiple tools, saving space, time, and money. It’s an investment that offers both versatility and durability. If you’re seeking efficiency, precision, and flexibility all rolled into one, the FURY6 is your go-to machine. There is nothing that this saw can’t cut and everything from wood, aluminium, plastic, and steel can all be cut with this tool using one blade. Just like many other saws that have come before it, this one has a multipurpose carbide-tipped blade that is made in Japan. This blade offers high-level performance and quality. Usingthebladeslottoprovidemaximumclearanceandaccess to the machine, carefully and gently manoeuvre the blade up

Reviews & Projects

Es gibt keine Garantie - schriftlich oder mündlich - für Verbrauchsmaterial Zubehör wie (Liste ist nicht abschließend) Messer, Fräser, Bohrer, Meißel oder Paddel etc. In keinem Fall ist Evolution Power Tools Haftung für Verluste oder Schäden, die direkt oder indirekt aus der Verwendung unserer Ware oder aus einem anderen Grund. Evolution Power Tools haftet nicht für irgendwelche Kosten auf solche Waren oder Folgeschäden verantwortlich. Kein leitender Angestellter, Mitarbeiter oder Vertreter von Evolution Power Tools ist berechtigt, mündliche Erklärungen von Fitness zu machen oder einem der vorhergehenden Verkaufs verzichten und niemand wird verbindlich Evolution Power Tools. This sturdy buy from Draper is a good mid-level mitre saw that will last, and make light work of cutting timber, even if it does require a bit more elbow grease than an electric mitre saw. Precision in Cuts: Whether it’s bevel cuts up to 45° or mitre cuts from -47˚ to 47˚, the FURY6 promises accuracy. The sturdy rip fence is perfect for accurate straight cuts on wood. b) Die Messung und Bewertung der Einwirkung von Schwingungen auf das Hand-Arm-System des Menschen ist in folgender Norm enthalten: Also features durable die-cast aluminium base, resistant to the most demanding metallic applications.

EnsurethattheCuttingHeadisintheverticalposition,againstits stop with the Bevel Pointer indicating 0˚ Bevel Angle. A sliding mitre saw is usually beneficial over a fixed saw head, as it means you'll be able to cut to much larger widths. These are however larger, making them harder to store, and heavier, which can be an issue for transporting them. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for Note: The 5mm blade slot at the lower front of the Cutting Head (Fig. 30) provides extra clearance when manoeuvring the blade into or out of the machine. given supervision or instruction concerning the safe use of the machine by a person responsible for their safety and who

Evolution Mitre Saw Blades:

WARNING: Rotating Circular Saw Blades are extremely dangerous and can cause serious injury and amputation. Always keep fingers and hands at least 150mm away from the blade at all times. Never attempt to retrieve sawn material until the cutting head is in the raised position, the guard is fully closed and the saw blade has stopped rotating. The saw is also workbench mountable and supplied with rubber suction feet which help to keep it firmly in place on work surfaces. Wherever practicable always secure the work piece to the saw table using the work clamp where provided.

Note: It is recommended that the operator considers wearing protective gloves when handling the blade during installation or when changing the machines blade. Avoidawkwardoperationsandhandpositionswhereasudden slip could cause fingers or hands to move into the blade. A Dust Bag (not supplied) can be fitted to the extraction port at the rear of the machine. (Fig. 3a & 3b) Advanced performance; out performs normal saws. When cutting Steel (only in Mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks.Respiratory protection is also advised as some wood and wood type products especially MDF (Medium Density Fibreboard) can produce dust that can be hazardous to your health. Note: The left hand side of the fence is provided with additional adjustments. The upper portion of the fence can slide to the left to provide clearance for the blade. This may be necessary when acute bevel angles are selected.